Skip to content

Close to wall toilet?

A close to wall toilet is a great option for small bathrooms or any bathroom where you want to save space. These toilets are installed closer to the wall than a standard toilet, which means that you can have a smaller bathroom without sacrificing comfort or function.

There is no definitive answer to this question as it depends on the specific toilet in question and the layout of the bathroom. However, in general, a toilet that is close to the wall is likely to be more space-efficient than one that is not, and may also be easier to clean.

Whats the closest the toilet can be to the wall?

Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. The NKBA actually recommends 32 inches.

Most toilets have a 12 inch rough-in. Toilets with a 10- or 14-inch rough-in measurement are less common, so you might have less of a selection to choose from. If you’re replacing an existing toilet, look for a replacement toilet with the same rough-in.

How far away from the back wall should a toilet be

The standard distance from the back wall for a toilet flange is 12 inches, or 12-1/2 inches from the center of the flange to the wall framing. This is to allow for the standard 1/2 inch drywall. If the plumber sets the toilet flange at least 15-1/2 inches from the center of the flange to the wall framing, it will ensure that there is enough space for the drywall.

This is to ensure that there is enough space to install the toilet and that it will fit properly. If the flange is too close to any of these things, it could create problems when trying to install the toilet or could cause issues with the toilet itself.

Can a toilet be more than 12 inches from the wall?

The minimum clearance from the center of the toilet to any adjacent fixture or sidewall is 15 inches. Make sure there are at least 15 inches of clearance from the center of the toilet to any adjacent fixture (or wall).

See also  Mansfield toilet vs american standard?

A wall hung toilet is a great option for a smaller bathroom because it doesn’t take up as much space. It also shows off more of your floor tiling and can make your bathroom look bigger. The extra space underneath a wall hung toilet can also have the advantage of making cleaning easier.

How do you know if you need a 10 inch or 12 inch toilet?

If you’re measuring the distance from the center of the bolts to the wall, and it’s between 115 and 125 inches, then it’s a 12-inch rough-in.

The flange is the part of the toilet that is connected to the sewer line. It is important to keep any sidewalls or fixtures at least 15 inches away from the flange to allow for proper installation and function of the toilet. However, 15 inches is the absolute minimum distance required. It is recommended to have a 15-inch distance from the vanity, shower, tub, and back and side walls to accommodate the toilet flange.

How much space does a wall toilet need

The minimum required wall thickness for a wall mounted toilet is six inches. This is so there is enough wall to act as an anchor for your toilet. If the wall was less thick, you could cause extreme damage to your home, your toilet and yourself.

There is no set rule about whether a toilet should touch the wall or not. Some people prefer to have the toilet tank’s top against the back wall, while others like to have a minimum of one inch of space between the commode and the wall. It is really a matter of personal preference.

Does an in wall toilet save space?

Wall-mounted toilets are a great way to save space in your bathroom. By moving the tank into the wall, you can save up to 10 inches of space. And, by adjusting the bowl to sit 15 to 19 inches off the ground, you can make your bathroom more comfortable for everyone.

See also  Shut off valve under-sink?

There are a few reasons why toilets and bathtubs are often next to each other in homes. One reason is that both of them are usually located in small, private rooms in the house. This helps to keep them both out of the way and out of sight from the rest of the house. Another reason is that both toilets and bathtubs require fairly substantial plumbing in order to function properly. This means that it is often more convenient to have them next to each other, as it can make the plumbing installation and upkeep simpler.

Does a 10 inch rough in toilet save space

If you’re shopping for a toilet, you’ll need to know the rough-in size for your bathroom. This is the distance from the wall to the centerline of the drainpipe. Most toilets have a rough-in of 12 inches, but some have a rough-in of 10 inches. If you have a 10-inch rough-in, you’ll have extra space in a 12-inch rough-in space.

The numbers on a toilet bowl indicate the distance from the wall to the center of the flange. Most toilets will work with a 10″ or 12″ distance, but a 10″ rough tank is slimmer to allow for the decreased distance.

What are the disadvantages of wall-mounted toilet?

The cost of a wall-mounted toilet can be a con for many people since they are more expensive than floor-mounted toilets. They also require more effort to install since you have to mount the tank and assembly on the wall. Many times, the tank and assembly are sold separately from the toilet, which can add to the cost.

Cleaning your toilet should be quick and easy, and with an accessible toilet, it can be! Unlike with a more conventional toilet style, there are no nooks and crannies for dust and dirt to get trapped in, no sealant holding it to the floor to discolour over time, and pretty much no hard-to-reach areas. So, when it comes time to give your toilet a good clean, there’s no need to go to extra lengths – a quick once-over will do the trick!

See also  Legs leaving residue on toilet seat?

Do wall hung toilets leak

If you have a wall-hung toilet, it is important to check for leaks regularly. A leaking wall-hung toilet can cause damage to the bathroom wall and floor, as well as to the rooms below. For this reason, it is important to find and repair a toilet leak as quickly as possible.

If you are looking for a toilet that is a little bit taller than a standard toilet, then you should look for a comfort toilet. Comfort toilets typically measure 17 to 19 inches from the floor to the top of the seat. This is specified by the Americans with Disabilities Act (ADA) so that disabled people can have a toilet that is the right height for them.

Is it better to have a higher or lower toilet

Although comfort height toilets can offer some advantages, they are not necessarily comfortable for everyone. Taller folks, the elderly and people with mobility problems may find them to be a better option, but people of all ages and sizes can find them to be uncomfortable. If you are considering a comfort height toilet, be sure to try it out before you buy it to make sure it is the right fit for you.

If you’re shopping for a new toilet and your home has a 10-inch rough-in size, be sure to purchase a toilet that is made for a 10-inch rough-in. A 12-inch rough-in toilet will not fit in a bathroom with a 10-inch rough-in size.

Conclusion

The height of a close to wall toilet is generally lower than that of a standard toilet. This makes it easier for people with mobility issues to use.

Toilets that are close to the wall are a great option for small bathrooms. They don’t take up much space and can still provide all the function of a standard toilet. If you’re looking for a toilet for a small bathroom, a close to wall toilet is a great option.