In the United States, toilets come in two basic shapes – round and elongated. Elongated toilets are around two inches longer than a round toilet. Most people find elongated toilets more comfortable, but both shapes will fit the same size toilet seat.
No, they do not. Toilet seats come in a variety of shapes and sizes to fit a variety of toilet models.
Table of Contents
How do I know what toilet seat will fit my toilet?
You can definitely tell by measuring the distance from the center using a tape measure.
To measure the width of a bowl, you will need to find the widest point of the bowl. To do this, you will need to measure from the seat bolts to the outer edge of the front of the bowl. Round bowls should have a length of about 16 1/2 inches and elongated bowls should be 18 to 18 1/2 inches.
Can you put an elongated toilet seat on a standard toilet
There is no difference in the seats themselves, only in the shape of the lid. Elongated bidet seats will fit on either size toilet.
If you’re unsure which type of toilet seat you need, it’s a good idea to measure the bowl before you buy a new seat. That way, you can be sure you’re getting the right size.
How do I know if my toilet is 2 or 3 inches?
If the flush valve drain opening at the bottom of your tank looks about the size of a baseball or orange, you need a 2″ flapper. If the opening looks about the size of a softball or grapefruit, you need a 3″ flapper.
If you’re not sure which type of toilet seat you have, the easiest way to figure it out is to measure. Here is a comparison of two typical Caroma toilet seats; remember, if it is approximately 165″, you have a round front bowl. If it is approximately 185″, you have an elongated bowl.
What is the most common size toilet seat?
The average width of a toilet seat is 14-14.5 inches. The average round length is 16-17 inches. The average elongated/extended length is 18-19 inches.
When shopping for a toilet seat, you will need to decide between a round or elongated seat. A round seat is also called a “regular” or “plain” seat, while an elongated seat is also called an “extended” seat. Some consumers also refer to an elongated seat as an “oblong” seat.
The key difference between the two types of seats is the length. An elongated seat is two inches longer than a round seat. This may not seem like much, but it can make a big difference in comfort.
How do I replace a toilet seat
If you’re planning on replacing your old toilet seat with a new one, there are a few things you’ll need to do in order to ensure a proper fit. First, you’ll need to measure your toilet to see what size seat you need. Second, you’ll need to purchase a seat that will fit those measurements. Finally, you’ll need to remove the old seat by unscrewing it from the toilet.
Toilets are manufactured for “rough-in dimensions and are offered in 3 sizes: 10 inches, 12 inches, or 14 inches. When you measure from the finished wall to the center of the toilet bolts at the floor level, that will determine the rough-in size toilet you would need to purchase.
What is the advantage of an elongated toilet seat?
Elongated toilet seats offer more bowl area than round seats, making them more comfortable for bidet use, cleaning, and personal hygiene.
Most professionals recommend spending no more than 10 minutes on the toilet. Studies have shown that the average bowel movement takes 12 seconds, but sometimes it does take longer. If you spend more than 10 minutes on the toilet, you may be at risk for health problems such as dehydration or constipation.
Are toilet seat mounting holes standard
There are a range of different toilet seat fittings, so the answer is no, you cannot simply use any seat on any toilet. Make sure to check the measurements and compare them to your toilet before making a purchase.
Your toilet seat hinges can come in different sizes and materials, so be sure to consider both when making your selection!
Are most toilets 2 or 3 inch?
A majority of toilets will use the two inch flapper; however three inch flappers have become popular in recent years and can be found in newer toilets manufactured since 2005 An easy reference for determining your toilet’s flapper size is to look at the flush valve drain opening at the bottom of your tank. For example, if your flush valve drain opening is 2-1/4 inches, you will need to purchase a 3 inch flapper.
There are pros and cons to both standard height and comfort height toilets. Standard height toilets are typically less expensive, but comfort height toilets may be more comfortable for some people. Your plumber will be able to show you all of your options and help you choose the right type of toilet for your needs.
Final Words
No, all toilet seats do not fit the same. They come in different sizes and shapes to fit different types of toilets.
After doing some research, it seems that most toilet seats are designed to fit a standard size toilet. However, there are some seats that are designed for larger or smaller toilets. It is always a good idea to measure your toilet before purchasing a new seat to make sure you are getting the right size.