Elongated toilets are toilets whose bowls are longer than the standard size. They are sometimes also referred to as comfort height toilets. Elongated toilets offer a number of advantages over standard toilets, including increased comfort and easier cleaning. However, they also require more space, so if you are tight on space in your bathroom, a standard toilet may be a better option.
The standard dimensions for an elongated toilet are about 12 inches from front to back and about 18.5 inches from side to side.
Table of Contents
What size is an elongated toilet?
There are two types of toilet bowls – round and elongated. Round bowls typically measure 16 to 17 inches from the mounting holes on the toilet seat to the front of the bowl’s rim. Elongated bowls have a slightly longer length and typically measure 18 to 19 inches. Both round and elongated bowls are usually about 14 to 14 and a half inches wide.
If you’re looking for an elongated bowl, the standard size is 18-1/2 inches from the bolts to the front. The most common elongated configurations come in chair height, which is about 16-1/2 inches tall. There are also ADA options which are as tall as 17-1/2 inches.
How far does an elongated toilet stick out
Most people find elongated toilet bowls to be more comfortable, but in a small bathroom, a round bowl can save space. Elongated toilet bowls measure up to 31″ from the wall, while round fixtures max out at 28″. Because round bowls are less expensive than elongated bowls, they save a few dollars, too.
There is no definitive answer when it comes to finding the perfect toilet. However, standard toilet dimensions are typically between 28-30″ deep, 20″ wide, and 27-32″ high. The rough-in (the distance from the wall to the center of the drain) is usually between 10-14″. With these measurements in mind, you should be able to find a toilet that will work for your space.
How do I know if my toilet is 2 or 3 inches?
If the flush valve drain opening at the bottom of your tank looks about the size of a baseball or orange, you need a 2″ flapper. If the opening looks about the size of a softball or grapefruit, you need a 3″ flapper.
If your toilet was manufactured after 2005, it is likely that it uses a three inch flapper. If your toilet was manufactured before 2005, it is likely that it uses a two inch flapper. You can easily determine your toilet’s flapper size by looking at the flush valve drain opening at the bottom of your tank.
Are elongated toilets better for seniors?
A taller toilet can be a great choice for seniors or taller people who have difficulty getting on and off a standard toilet seat. The extra inches can make all the difference in comfort and ease of use. If you have any concerns about your ability to use a taller toilet, be sure to consult a healthcare professional to get the best advice for your individual situation.
A 10-inch rough-in is the usual measurement installed in older homes. However, the 12-inch measurement is the standard for modern toilet plumbing. This is because the extra two inches provides more space for the drain and water lines, as well as the wax ring that seals the toilet to the flange.
What is a comfort height toilet
A comfort height toilet is a great option for anyone who is looking for a little extra height in their toilet. These toilets tend to be between 17 and 19 inches from the ground, which is a few inches taller than a standard toilet. This can make it much easier to use the toilet, especially for taller individuals or those with mobility issues.
Most professionals recommend spending no more time on the toilet than it takes to pass a stool. Studies have shown that the average bowel movement takes 12 seconds. Sometimes it does take longer, however, so at maximum, you should not spend more than 10 minutes on the toilet.
What toilet height is best?
There are two standard heights for toilet rims, 14- to 15-inches from the floor, and 17-inches or more. The taller height is better for taller people.
If you find yourself with a toilet that is too far from the wall, you have a few options for solving the problem. One is to use an offset flange, which will allow you to move the toilet closer to the wall. However, this option does require that you remove the toilet, as well as the subfloor and the slab around the toilet. You will also need to change the direction of the plumbing pipes.
How do I know if I need a 10 inch or 12 inch toilet
If you’re planning on replacing your toilet, it’s important to know the rough-in measurement. This is the distance from the center of the capped bolts on the bottom of the toilet to the wall (not the baseboard). The ideal measurement is 24 inches from the wall facing the bowl, with 15 inches of clearance on each side. If your measurements are between 115 and 125 inches, it is a 12-inch rough-in.
There are many considerations to take into account when deciding on the placement of toilets and bidets in a bathroom. Codes typically require a minimum of 15 inches from any side wall or obstruction, and a minimum of 30 inches between fixtures. The NKBA (National Kitchen and Bath Association) recommends a 32-inch space between fixtures. Other considerations include the location of doorways, windows, and towel racks. In general, it is best to place toilets and bidets away from these areas to maximize privacy and minimize traffic in the bathroom.
Is 30 inches wide enough for a toilet?
The National Kitchen and Bath Association (NKBA) recommend that toilets have a minimum of 21 inches of space in front of them, but ideally 30 inches. This allows for more comfort and accessibility, especially for people with mobility impairments.
In new construction, 4-inch drains can be installed from every toilet, or you can run a 3-inch drain line from a toilet to the home’s main 4-inch drain pipe — the line running from the house to the sewer or septic system. Older homes may have only 3-inch drains, so that’s what you have to work with. You can install a 4-inch drain line in an older home, but you will need to get a permit from your local municipality first.
Conclusion
There is no one-size-fits-all answer to this question, as the measurements of an elongated toilet will vary depending on the specific make and model. However, as a general guide, an elongated toilet will typically be around 18 inches long (from the back of the tank to the front of the bowl), and around 14 inches wide (measured from the widest point of the bowl).
elongated toilets are generally considered more comfortable than round toilets, but they take up more space. If you’re limited on space in your bathroom, a round toilet may be a better option.